tel 0044(0)118 979 1238 fax: 0044(0)118 979 1283 email: info@act crystals.com stability: 0.28ppm (-40 ~ +85c) accuracy: 1.0 ppm (25c at time of shipment) aging 4.6ppm 10years, 0.7ppm 1st year (25c) developed freq 10, 12.8, 19.2, 20 & 26mhz characteristics frequency range (mhz) 10 ~ 40 supply voltage 5% vcc (v dc ) 3.35% operating temperature top (c -40 ~ +85 stabilty v t op (ppm) 0.28 stabilty v vcc(ppm) 0.2 stabilty v load (ppm) 0.2 aging @25c (ppm) 4.6 (10yr) 0.7 (1st yr) tolerance @ 25c (ppm) 1.0 load 10% 15pf10% lvcmos output voltage v oh >3v, v ol >0.3v duty cycle 45/55% afc ( voltage control) available (enquire) phase noise (dbc/hz) 10hz 10mhz 25c 100hz 1khz 10khz 100khz rating storage temperature (c) -50 ~ +95 humidity (%rh) 5 ~ 90 air pressure (kpa) 70 ~ 106 esd sensitive, take precautions. vibration iec60068-2-6 fc 10~55hz sine 0.75mm, 1.5hr, x,y & z shock iec60068-2-27fc 100g ? sine 3 bump, x, y & z marking: wy: week/year tape & reel standard reel: 1k issue no. date: 1 t3 29/08/2013 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey for quotations or further information please contact us at: iso9001 registered to specify: please refer to part numbering system appended to the end of this data please note that all parameters can not necessarily be specified in the same device. act smpt7 stratum 3 tcxo smpt7 -s3 -110 -135 -75 -145 -145
tel 0044(0)118 979 1238 fax: 0044(0)118 979 1283 email: info@act crystals.com act smpt7 stratum 3 tcxo w b i n e x x h -pf smpt7 0.28 3.3 none none pos 45/55 ppm v dc c hcmos % rohs smpt7 t97 stability t op c tcxo v t op -40 +85 i polarity ppm none x 0.28 w duty cycle v cc v dc frequency % / % 3.3 b tuning h none n output hcmos e tape & reel c mechanical l tuning ppm x t97 - 2000wbinexxhc-pf 20mhz issue no. date: 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey 1 t3 29/08/2013 smpt7 -s3 please note that all parameters can not necessarily be specified in the same device. to specify: please refer to part numbering system appended to the end of this data iso9001 registered -40 +85 t97 2000 20.00mhz 45/55 1000 loose 1000 c for quotations or further information please contact us at: none frequency: please enquire if the frequency/stability combination has been developed. for part numbering use the first 4 characters of the frequency in hz ie 27mhz = 27000000hz so the code used in the part number is 2700. if the frequency is 100mhz or higher then the first 5 characters are used. it is important to suffix the part number
|